Our free peacock feather applique pattern will add a touch of elegance to any quilting project!
Be sure to get updated on the new designs like this one by signing up to receive our e-zine. Every issue has a new quilting design just for e-zine subscribers.
For now sit back and relax while we walk you through our relaxing, yet entertaining, technique of using applique to make any quilt extra special.
Our methods work of other applique patterns too. Feel free to incorporate this technique with any applique task.
Get your free copy of this free peacock feather applique pattern go here:
The size can be adjusted if needed with your computer’s own editing software.
When the size is to your liking, print the image out with your printer.
Now that the pattern is physically in your hands we have to trace it onto the paper side of your favorite fusible.
Once the design of this peacock feather applique pattern is traced, then cut out the design around the lines. This is to ensure that we will be trimming the fabric on the line AFTER the applique quilting pattern is adhered on.
Be sure not to cut upon the line at this time. That will happen later.
Now that the shape is cut out it’s time to press them onto the back of the appropriate fabric. Do this with a medium hot iron. Press the pieces onto the backs of the desired fabric. Count to 3 as you press down.
When the fusible is glued to the back of the correct fabrics, cut along the lines of the design.
Most of the time you will be cutting only a thin layer of fabric along the edges. This is alright. The trimming will prevent your fabric from fraying and avoiding the whiskered effect that you don’t want.
After doing the last trimming to your design piece we need to find out where on the fabric you want the design to be.
Once you have that established, press the piece into place with the medium hot iron again and count to 5.
Then you may stitch down your applique with a tight zigzag or satin stitch if so desired.
Now you have completed your applique.
The following is some troubleshooting tips that you might find useful.
Do you have frayed pieces? Does it look like whiskers?
Trim them with tiny thread scissors this time. Next time, cut exactly on the lines after you pressed the adhesive onto the back of the fabric.
Do you have shiny stuff on your background around the edges of your applique?
Here’s an easy way to get rid of that cruddy sticky stuff.
Take a clean piece of paper (copier paper will do) and place it over the spot. Use the edge of your iron on the exact spot by rubbing it back and forth over the paper. Re-adjust the paper and repeat as necessary. The adhesive will bond with the paper and be removed.
Is your needle gumming up as you are stitching the applique into place?
For now use rubbing alcohol to remove the tacky glue from the needle each time you stitch. Make sure the needle isn’t moving when you do this.
Next time remember to use only lite hold Heat n Bond for projects that require stitching on adhesive.
This free peacock feather applique quilting pattern will grace your quilt top with glorious elegance!
Please, post pictures of your amazing projects on our quilting forum. We would all love to drool over them! :)
Until next time.
Peacock Feather Applique Pattern